Howdy, Stranger!
Categories
- All Categories
- 73 General
- 73 Announcements
- 66.5K Microsoft Dynamics NAV
- 18.5K NAV Three Tier
- 38.4K NAV/Navision Classic Client
- 3.6K Navision Attain
- 2.4K Navision Financials
- 115 Navision DOS
- 854 Navision e-Commerce
- 1K NAV Tips & Tricks
- 772 NAV Dutch speaking only
- 615 NAV Courses, Exams & Certification
- 2K Microsoft Dynamics-Other
- 1.5K Dynamics AX
- 262 Dynamics CRM
- 109 Dynamics GP
- 10 Dynamics SL
- 1.5K Other
- 992 SQL General
- 385 SQL Performance
- 33 SQL Tips & Tricks
- 34 Design Patterns (General & Best Practices)
- Architectural Patterns
- 10 Design Patterns
- 5 Implementation Patterns
- 53 3rd Party Products, Services & Events
- 1.7K General
- 1.1K General Chat
- 1.6K Website
- 79 Testing
- 1.2K Download section
- 23 How Tos section
- 259 Feedback
- 12 NAV TechDays 2013 Sessions
- 13 NAV TechDays 2012 Sessions
Options
NAV 2009 R2 connection to a machine via RS232
denz
Member Posts: 3
Hello,
I need to connect a cnc machine to NAV 2009 R2. The machine called OSAI will send characters over RS232 to a PC where a client of NAV is installed (RTC). I've read a lot but I'm not really sure because most of the things are from 2002 to 2007 so maybe it's outdated for NAV 2009.
So from the work flow it should be the following:
1. First the barcode of the product is scanned so NAV knows the corresponding parameters.
2. Now NAV send to the OSAI machine a character that signalize the OSAI machine that NAV is ready to send the information.
3. The OSAI machine send to NAV a character the that signalize NAV that the OSAi machine is ready to receive the information.
4. Then NAV send the information of 5 characters (4 for information and one for parity check).
5. The OSAI makes the parity check and send back a character depending on the result.
6. When the OSAI machine is finished it's process it should send 5 characters back to NAV.
On the OSAI machine there is a RS232 interface that I will connect to the PC.
How can I realize the communication?
Many thanks in advance!
I need to connect a cnc machine to NAV 2009 R2. The machine called OSAI will send characters over RS232 to a PC where a client of NAV is installed (RTC). I've read a lot but I'm not really sure because most of the things are from 2002 to 2007 so maybe it's outdated for NAV 2009.
So from the work flow it should be the following:
1. First the barcode of the product is scanned so NAV knows the corresponding parameters.
2. Now NAV send to the OSAI machine a character that signalize the OSAI machine that NAV is ready to send the information.
3. The OSAI machine send to NAV a character the that signalize NAV that the OSAi machine is ready to receive the information.
4. Then NAV send the information of 5 characters (4 for information and one for parity check).
5. The OSAI makes the parity check and send back a character depending on the result.
6. When the OSAI machine is finished it's process it should send 5 characters back to NAV.
On the OSAI machine there is a RS232 interface that I will connect to the PC.
How can I realize the communication?
Many thanks in advance!
0
Comments