Reset ACY setting in GL Setup

hollydonuthollydonut Member Posts: 27
hi all,

Is there any ways to get the ACY fields in ILE or VE got back to 0?
my company decide to turn on the ACY reporting, but might be only for short period of time and
want to check if it possible to reset the whole system like ACY never been used when we turn off ACY reporting.

Comments

  • jglathejglathe Member Posts: 639
    Hi,

    yes. Just remove ACY code from the G/L Setup.

    with best regards

    Jens
  • hollydonuthollydonut Member Posts: 27
    I have try that but, for example, the value in Cost Amount Expected (ACY) in ILE still has value after i remove the setup.
    Is there any way to make the value back to 0?
  • jglathejglathe Member Posts: 639
    Hi hollydonut,

    drats... one of these limitations again ;-) If you clear the ACY code in the G/L Setup, the ACY field swill be filled with the LCY amounts. So, not necessarily zero. To change this, report 86 "Adjust Add. Reporting Currency" needs to be modified.

    with best regards

    Jens
  • hollydonuthollydonut Member Posts: 27
    thank for the replies. but my company decide to drop this issue. \:D/ \:D/
Sign In or Register to comment.